Maytag MAH-2 Mode D'emploi page 13

"B" Stains
baby formula beverages
blood butter
Step 4
Select the appropriate stain listing.
Note: Use the arrows at
the top of the screen to
scroll from letter to letter.
B Y C
EFORE OU ALL
Step 1
Touch the Help touchpad.
Step 4
If you would like to see the other topics, press
the Back touchpad to get back to the main
topics.
Special Note: Press Back or Home for previous touchscreen.
Baby Formula
1. Pre-treat the stain.
2. Use the Pre-Soak option with warm
water or soak in warm water for 1/2 hour.
3. Launder with appropriate bleach and
hottest water safe for the fabric and color.
4. Select the Stain Cycle option and Extra
Heavy wash time.
set washer for this stain
Step 5
To automatically set the washer to
run the appropriate cycle for the
selected stain, touch "Set Washer
For This Stain".
Help Screen
before
stain brain
you call
laundry hints operating tips
lock out select
feature preferences
Step 2
Select "Before You Call".
cotton/sturdy
fabrics
warm wash
cold rinse
ex.heavy soil
34 min. wash
Step 6
Review Screen - This screen reviews the selections
made by the Stain Brain before starting the washer.
Press Start/Pause to begin washing, or press a dis-
played choice to change selections.
Before You Call
won't fill won't tumble
washer won't
too noisy
spin & drain
washer stops leaks water
To answer questions or request service,
call PriorityOne at 1-888-462-9824
Step 3
Here you will see headings for common trouble-shooting topics.
Touch one of the displayed areas to see specific information.
Touch the arrows at the top of the screen to move forward or
back through the topics. For more detailed information see
"Before You Call" section pg. 20-21, or call 1-888-462-9824 for
further assistance.
12
Press "start/pause" or
change selections below.
options
medium cycle chime
max extract spin
pre-soak ON
stain cycle ON
Too Noisy
• Your Maytag Neptune washer should be
properly leveled.
• Weak floors can cause vibration and
walking.
• Be sure the rubber feet are installed on the
legs.
• Check that the leveling leg lock nuts are
tight.