Start-Up - Beurer LB 50 Mode D'emploi

4 S
TART
Unpacking
Check contents: If any parts are missing,
please contact your authorized dealer.
Remove all packaging and transport
locks.
Clean before using for the first time
For reasons of hygiene, we recommend
rinsing the humidifier, water tank and pad [4]
thoroughly with cold water before using for
the first time. Proceed as described in
Chapter 6 'Care', in the section on 'Cleaning
the Appliance', page 17.
Humidifier placement
Caution
Place the appliance so that the steam
nozzle is not pointing directly at a wall.
The exiting moisture might otherwise
cause damage to walls, particularly to
wallpaper.
Place the humidifier on a firm, even,
water-resistant surface.
Position the mains cable [14] so that the
appliance cannot be knocked over.
-
UP
Connecting mains cable
WARNING
Before putting
operation, make sure that the cable [14]
is not damaged. Never operate the
appliance
damaged.
The appliance may only be operated
with the voltage indicated on the rating
plate.
Connect your humidifier to the mains by
plugging the mains plug [14] into the wall
socket.
Filling the tank
Before using the appliance for the first time,
the tank must be filled. See Chapter 5
'Operation', in the section on 'Filling the
Tank' (page 15).
14
the appliance
if the mains cable
into
is