Publicité
Les langues disponibles
Les langues disponibles
FITTING INSTRUCTIONS
Headband
1. Slide out the earcups and tilt the top of the shell out, as the cable must be on the
outside of the headband. (D:1)
2. Adjust the height of the cups by sliding them up or down while holding the headband
in place. Ensure the ear fits within the ear cushion. (D:2)
3. The headband should be positioned across the top of your head to support the weight
of the headset. (D:3)
Fig. D
Backband
1. Hold the headset in front of you with the backband below the ear cushions and towards
the user. (D:4)
2. Bringing the headset over the head, place the cushions over the ear with the backband
resting at the base of the neck. (D:5)
3. Take the hook-and-loop straps attached to each headset and bring over the head and
fasten together, ensuring each ear cushion remains over the ear and is supported by
the head strap.
4. The head strap should be positioned across the top of your head. (D:6)
NOTE: The hook-and-loop strap can also be fitted over the top of the helmet.
5. Place the ballistic helmet on the head. Adjust the chinstrap, working each earmuff
through the v-shape created by the rear and forward chin strap. (D:7)
6. Donning the helmet with the headset can be awkward; have a team member ensure
fit and help with any adjustments. (D:8)
D:1
D:4
D:2
D:5
6
D:3
D:6
Publicité
