patura P20 Mode D'emploi page 29

Connecting a 12 V battery (optional)
A 12 V battery connection cable can be purchased from your local PATURA dealer. Instructions
for connecting a 12 V battery to an energiser are supplied with the connecting cable.
Connecting to an electric fence
The energiser automatically detects whether a 9 V or 12 V battery is connected.
1. Push earth stake fully into firm ground. If the ground is dry or sandy, performance can be
improved by using a longer earth stake that can be obtained from your fencing supplier.
2. Connect the green earth lead to the earth terminal (
earthing system.
3. Connect the red fence lead to the fence terminal (
fence. Provide a good connection.
Operating the PATURA P20 energiser
Switching on and off
1. To switch on the energiser, turn the rotary switch clockwise (right) to
The energiser will deliver a pulse once every 1.5 seconds. The red indicator light flashes
to indicate an output pulse.
2. To switch off the energiser, turn the rotary switch anti-clockwise (left) to
The red indicator light stops flashing.
Operating the PATURA P40 and P60 energisers
There are six operating modes to select from, depending on your requirement.
Use the rotary switch settings to select an operating mode.
Rotary switch settings
Setting Mode
OFF
OFF
BATTERY TEST
) of the energiser and then to the
) of the energiser and then to the
Description
The energiser is off and is not operating.
The Indicator lights show the battery level.
Note: The energiser does not operate
in BATTERY TEST mode.
- 29 -
.
.
OFF