Weller WX 1 Traduction De La Notice Originale page 19

Parameter menu
Offset (Temperature-Offset)
The actual soldering-tip temperature can be
adapted by entering a temperature offset around ±
40 °C (± 72 °F).
Perform. Mode
The function determines the heating characteris-
tics of the soldering tool to achieve the set tool
temperature.
Button lock WXHAP 200
This function can be used to adjust the factory
button presets of the WXAHP tool.
Process window
The temperature range set in the process window
determines the signal response of the floating
switching output.
Notice
On tools with an LED ring light (e.g. WXDP 120),
the process window defines the illumination
characteristics of the LED ring light.
Language
CHN
中文
DEN Dansk
ENG English
ESP Español
FIN Suomi
Temperature version °C/°F (temperature units)
Option Description
° C Celsius
° F Fahrenheit
FRA Français
GER Deutsch
HUN Magyar
ITA Italiano
POR Português
Open Menu
Open Menu
Option Description
Standard Adapted (medium) heating (factory
setting)
Min. Slow heating
Max. rapid heating
Open Menu
Option Description
OFF –
ON The WXHAP 200 is switched on the
first time the button is pressed and
switched off the next time the button is
pressed.
Open Menu
If the LED is continuously illuminated, this means
that the preselected temperature has been
reached or that the temperature is within the
predetermined process window.
A flashing LED indicates that the system is
heated or that the temperature is outside the
process window.
Open Menu
RUS Pусский
SWE Svenska
TUR Türkçe
JPN
日本語
POL Polski
Open Menu
Tool parameters
Tool parameters
Tool parameters
Tool parameters
Station parameters
KOR 한국말
CZE Český
Station parameters
35