Leckey Mygo Mode D'emploi page 18

B
D
7.14 Attaching the chest/
hip wrap around harness
To attach the chest/hip wrap around harness,
slide the cushions onto the PU lateral with
the flaps towards the outside of the stander
(a), feed the plastic buckle (b) through the
hole in the cover, then bring the two Velcro
fastener straps (c) around the PU lateral and
attach them to the Velcro panel as shown.
Close over the flap (d). Repeat this on the
other side.
A
C
D
B