Technical Data; Noise & Vibration; Dust Collection System - Pattfield Ergo Tools PE-300MFW Traduction De La Notice Originale

Technical Data

Nominal voltage
Rated power
No-load speed (n )
0
Oscilating angle
Protection Class
Sound pressure level (L
Sound power level (L
Max. vibration emission (a
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 60745 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure. The declared vibration data rep-
resents the main applications of the tool, but
different uses of the tool or poor maintenance
can result in different vibration data. This may
significantly increase the vibration level over
the total working period.
An estimation of the vibration level should
also take into account the intervening periods,
when the tool is switched off or it running but
is not actually in use. This can result in a much
lower vibration load over the whole working
period.
Additional safety measure can be taken to
protect the user from effects of vibration:
Maintain the tool and its accessories, keep the
hands warm and organize work patterns.
88 EN
)
pA
)
WA
)
hw
230 V / ~50 Hz
300 W
15000 - 21000/min
1.4° left / right
/ II
79 dB(A) / Uncertainty K = 3 dB(A)
90 dB(A) / Uncertainty K = 3 dB(A)
14 m/s / Uncertainty K = 1.5 m/s
2

Dust collection system

Use of dust collection can reduce dust-related
hazards.
To prevent personal injuries, make sure to
connect a suitable vacuum cleaner to the
vacuum cable bracket. The port is capable of
a connector of 35 mm. It can be reduced to
32 mm with the vacuum connector.
2