Pattfield Ergo Tools PE-300MFW Traduction De La Notice Originale page 89

SCRAPER
1 Place the scraper on the tool
and fix it with the clamping screw with
washer 6.
Caution! Make sure the tool is
switched off and unplugged.
PLUNGE SAW BLADE
1 Place the plunge saw blade on the tool
holder 3 and fix it with the clamping
screw with washer 6.
Caution! Make sure the tool is
switched off and unplugged.
SEGMENT SAW BLADE
1 Place the segment saw blade on the
tool holder 3 and fix it with the clamp-
ing screw with washer 6.
Caution! Make sure the tool is
switched off and unplugged.
SANDING
1 Attach the vacuum tube to the tool and
fix it with the vacuum cable bracket.
Connect the tool to a suitable dust col-
lection system.
Caution! Make sure the tool is
switched off and unplugged.
3 Securely tighten the clamping screw
with washer 6 with the hex key.
holder 3 2 Securely tighten the clamping screw
with washer 6
Use the scraper for:
Carpets, coverings.
2 Securely tighten the clamping screw
with washer 6
Use the plunge saw blade for:
Wood, plastic, plasterboard, other soft
materials.
2 Securely tighten the clamping screw
with washer 6
Use the segment saw blade for:
Wood, plastic, non-ferrous metals.
2 Place the sanding pad on the tool hold-
er 3 and fix it with the clamping screw
with washer 6.
4 Align the holes in the sanding paper
with the ones in the sanding pad and
press the sanding paper into place.
Use the sanding pad for:
Wood, paint.
with the hex key.
with the hex key.
with the hex key.
EN 87