System Setup - Magnat DVS 4232 Mode D'emploi

The system can connect your TV use video output connector on the rear panel.
Using the system setup menus:
1. Press the SETUP button on the remote control to display the SETUP menu as shown below.
2. Use the buttons to select one of the SETUP options, highlight your desired selection
[ ] [ ]
with in each SETUP menu and press ENTER/PLAY button to confirm.
3. To exit the menu and go to another SETUP menu, use

System Setup

Use
[ ] [ ] [ ] [ ]
ENTER/PLAY button to confirm.
1. TV SYSTEM: To be selected in accordance with the color system of the TV to be connected.
a) NTSC: For NTSC zone, you can select "NTSC". (Used in the USA, Canada and Japan)
b) PAL 60: For PAL 60 uniform zone, you can select "PAL 60".
c) PAL: For PAL uniform zone, you can select "PAL". (Used in Western Europe)
d) AUTO: For multiple zone, you can select "AUTO".
2. TV TYPE:
a) 4:3PS (full-image scanning): available of the TV with average dimension. When a wide-screen
picture is played, the left and right sides of the picture will be deleted and the picture will be
seen on the screen.
b) 4:3LB (mailbox): please choose this option for a TV with average dimensions. When the wide-
screen picture is played, you will see black rims on the top and bottom of the TV screen.
c) 16:09 (wide screen): choose this option if the system connects to a wide-screen TV.
SYSTEM SETUP
buttons to select the highlighted mark to the option to be set, and use
button to select EXIT SETUP.
[ ] [ ]
- 21 -