Krüger & Matz KM1155 Mode D'emploi page 14

oPtical mode
1. Connect the 3,5 mm fiber optic adapter plug (not included) to the optical cable
and then to the AUX IN/OpTICAL input.
2. The speaker will automatically enter OpTICAL mode.
3. Connect the other end into the OpTICAL socket on your TV.
Note:
• In the OpTICAL mode, if there is no sound output, ensure the audio setting of
the input source is set to pCM mode.
While connect Bluetooth, the AUX or OpTICAL mode will automatically change to
Bluetooth mode.
The AUX or OpTICAL mode will change automatically to Bluetooth mode, when
attempted to connect the speaker via Bluetooth.
tWS (true WireleSS Stereo)
pair two same speakers to form a wireless left and right dual channel stereo system.
1. Turn on each unit by pressing the power button. Then press and hold
for about 3 seconds to activate the Bluetooth pairing. Bluetooth indicator will
flash in blue.
2. On the another speaker press the TWS button for 3 seconds to pair with the first
speaker. TWS indicator will flash white.
• The speaker will issue a sound signifying successful pairing. The TWS indicator
stops flashing and will light up on both speakers.
3. After connection, press M/S button to switch between left/right channel or
stereo mode.
• When stereo mode is activated, stereo indicator will light up.
Note:
• please note that under TWS mode, when listening to music in AUX/OpTICAL
mode the audio cable should be inserted into the 3,5 mm AUX IN/OpTICAL
input of the left channel speaker (where the Bluetooth indicator is flashing).
14
Owner's manual
button