Krüger & Matz KM1155 Mode D'emploi page 12

7. button
• press this button to turn on the speaker
• press and hold again to turn off the speaker
8. power indicator (red)
9. AUX IN/OpTICAL input
• connect audio/TV devices
10. SERVICE/CHARGE
• charge external devices
• servicing (authorized service point only)
11. DC IN
• connect power adaptor
12. TWS indicator (white)
PoWer SuPPly
Connect one end of the supplied power adapter into the speaker. Connect the other
end to the power supply socket, the power indicator will light up red.
Note:
• Unplug the speaker from power supply when it's not going to be used for a
longer period of time.
• It's also possible to charge external devices with the SERVICE/CHARGE port.
Connect one end of the USB cable to the port on the speaker and then
connect the other end of the cable into a USB port on an external device you
are going to charge.
• The maximum current for USB charging is 5 V / 1 A.
12
Owner's manual