HQ Power PA100U Mode D'emploi page 5

4 12 VDC CONNECTION
5 FUSE
Fuse holder with 1A fuse.
6 POWER SUPPLY INPUT
Input for the power supply cord.
6. Battery
To enhance the device's battery life, charge the battery at least once a month.
7. Technical Specifications
power supply
power consumption
input sensitivity/impedance
output level
S/N ratio (@ 1 kHz)
distortion
master tone control
delay time
autonomy (fully charged)
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 16/05/2013
PA100U
230 VAC 50 Hz or internal 12 V battery
10 W
MIC: 3.0 mV / 600 ohm
AUX: 300 mV / 27 kohm
amplifier: 16 W / 4 ohm
record: 775 mV / 10 kohm
frequency response: 20 Hz - 20 kHz ± 2 dB
MIC: > 80 dB / 3 mV
LINE: > 90 dB / 300 mV
MIC: 0.5 %
LINE: 0.3 %
treble: 12 kHz ± 15 dB
bass: 80 Hz ± 15 dB
50 - 120 ms
6 h
310 x 255 x 120 mm
5.6 kg
5 ©Velleman nv