Télécharger Imprimer la page

Plantronics Headset Switcher MX10 Guide D'utilisation page 14

Amplificateur
Masquer les pouces Voir aussi pour Headset Switcher MX10:

Publicité

Les langues disponibles

Les langues disponibles

Switcher.biling.ii-25
11/4/98 7:58 PM
Maintenance Hints
Trouble Shooting Guide
P R O B L E M
If you are using batteries to power the Switcher
I HEAR THREE
'BEEPS' IN THE
Amplifier, the three 'beeps' are telling you that the
HEADSET.
batteries are low and need to be replaced. See
"Installing Batteries" on page 1.
Confirm that the green jack plug on the external
THE MICROPHONE
LEVEL TO MY COM-
audio device cord is plugged into the "Mic In" jack
PUTER IS TOO LOUD.
on the soundcard.
Review your soundcard "Mixer" settings on the
computer to adjust the microphone volume.
Plug the black jack plug on the external audio
THE SOUND FROM
device cord into the "Line Out" jack and adjust the
MY COMPUTER IS
DISTORTED.
Audio Device Listening Volume (page 11) for com-
fortable volume.
Move the Telephone/Amplifier Compatibility Switch to
I AM USING MY
position #5. Depress the Telephone/Computer Audio
SWITCHER AMPLIFI-
ER WITH AN AUDIO
Switch (colored indicator showing). Depress the
DEVICE AND NO
Microphone Selection Switch (colored indicator showing).
TELEPHONE. I CAN-
NOT HEAR THE
The Plantronics Help Desk is ready to assist you!
AUDIO DEVICE.
Monday through Friday 8:00 AM to 5:00 PM PST
800 544-4660
20
e n g l i s h
Page 20
M A I N T E N A N C E A N D
T R O U B L E S H O O T I N G
I T E M S T O C H E C K
B
21

Publicité

loading