Bosch 800 Série Notice D'installation page 16

10
• Mount the dishwasher electrical supply junction box (A) and dedicated
receptacle in an accessible cabinet adjacent to the dishwasher (do not
mount the junction box or receptacle behind the dishwasher).
Note: Screws are not provided for mounting electrical supply junction box.
11
Strap
• Check all electrical connections to ensure they are secure and then
reattach the junction box cover.
• Place adhesive backed cord clip (provided in the installation kit)
5 inches from leg adjuster as shown in the figure above and route
power cord through the clip. Note:The length of cord measured
from the plastic back strap to the receptacle should be ≤ 47.25"
(1,200 mm).
• Plug the end of the supply cord into the back of the dishwasher as
shown until it clicks.
16
CLICK
Adhesive
backed
cord clip
A
Leg Adjuster