Installation - Falcon Classic Deluxe 110 Ceramic Mode D'emploi / Instructions D'installation & D'entretien

Installation

Dear Installer
Before you start your installation, please complete the details
below, so that, if your customer has a problem relating to
your installation they will be able to contact you easily.
Installer's Name
Installer's Company
Installer's Telephone number
You must be aware of the following
safety requirements & regulations
The cooker must be installed by a qualified electrician, in
accordance with all relevant British Standards / Codes of
Practice, in particular BS 7671, or with the relevant national
and local regulations, and only in a well ventilated space.
Read the instructions before installing or using the appliance.
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Particular attention must be given to the
relevant requirements regarding ventilation.
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent in
addition to the window.
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
You will need the following equipment to complete
the cooker installation satisfactorily
Multimeter (for electrical checks)
Cooker levelling tool (provided in pack)
You will also need the following tools:
1.
Electric drill
2. Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3. Rawlplugs (only required if fitting the cooker on a stone or
concrete floor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. Spirit level
8. Pencil
9. Adjustable spanner
10. Screws for fitting the stability bracket
Checking the parts
Grill pan and trivet
Handyrack
Inner and outer plinths
15
3 flat oven shelves and 1 drop
shelf
Roasting tin
Levelling tool and Allen keys