Femi 911 Mode D'emploi Et Entretien page 9

INDEX
1 INTRODUCTION TO USE ...................................... 9
2 INSTALLATION ....................................................... 11
3 ADJUSTMENT ........................................................ 11
4 USE ........................................................................ 12
5 ACCESSORIES ...................................................... 13
6 MAINTENANCE ...................................................... 13
7 TROUBLESHOOTING ........................................... 14
1 INTRODUCTION TO USE
Before using your mitre-saw, please read this instruction
manual very carefully in order to become familiar with the
machine and its recommended use.
Do not lose this manual as it is an essential part of the
machine itself. We recommend you always refer to it in
order to operate the machine in the best and safest way
possible.
Keep the manual with the machine and handy at all times
to be consulted whenever necessary.
Use the machine exclusively for the uses specified below,
follow manual instructions carefully and never try to force
or to tamper with it, or to use it inappropriately.
1.1 SAFETY INFORMATION AND NOTES
Do not underestimate the symbols "HAZARD" and
"CAUTION" in this manual.
Symbols and notes precede all hazardous operations both
to give safety messages and to draw the users' attention
to danger and also to outline the appropriate behaviour to
adopt to avoid such events.
The three symbols used and relative wording are the
following:
HAZARD:
high risk behaviour which could be severely
harmful.
CAUTION: behaviour which could be
moderately harmful or damage objects.
NOTE: the notes preceded by this symbol are
of a technical nature and simplify use.
1.2 OVERALL DIMENSIONS
Lenght 580mm-Width 540 mm-Height 650 mm
Upper work surface ................................ 475 x 325 mm *
* Dimension work surface ........................ 460 x 305 mm
Upper work surface max protrusion of blade ....... 55 mm
Bulk ..................................................................... kg. 22.5
1.3 SAFETY AND RULES
The machine was designed and built according to the
Community Directives in force: 98/37/CE, 2006/95/CE,
2004/108/CE.
The enclosed CE Declaration of conformity, togheter with
the CE mark on product, essentially comprise and are an
integral part of the machine: both guarantee product
conformity with the aforesaid safety Directives.
1.4 RECOMMENDED AND NOT RACCOMENDED
USE
The most advanced technologies have been used to design
and manufacture the mitre-saw. It is suitable to cut wood,
aluminium and plastics used by professionals, craftsmen
and expert hobbyists alike.
SUITABLE USE
To cut:
- HARD AND SOFT, DOMESTIC AND EXOTIC WOOD
BOTH LONGITUDINALLY AND TRANSVERSALLY
and with appropriate adjustments (specific blade and
clamps):
- PLASTICS
- ALUMINIUM AND ALUMINIUM ALLOYS
UNSUITABLE USE
Do not cut:
- FERROUS MATERIALS, STEEL AND CAST IRON OR
ANY OTHER MATERIAL NOT MENTIONED ABOVE AND
IN PARTICULAR FOODSTUFFS.
- CIRCULAR SAW WITHOUT PROTECTION.
1.5 STANDARD SAFETY PROCEDURE
- Remove all cuttings from the work surface ensuring it
is completely clean.
- Use the machine in dry areas and away from
inflammable substances or gas.
- Do not use the machine outdoors in adverse weather
or environmental conditions (explosive atmospheres,
storms or rain).
- Wear appropriate clothing: do not wear loose-sleeved
garments or objects such as scarves, chains or
bracelets which may get caught in machine's moving
parts.
- Always use personal protective gear: standard accident-
prevention goggles, well-fitting gloves, earphones or
earplugs and headgear to cover hair if necessary.
- Handle the power supply cable with care: do not use it
to lift the machine or to pull the plug out of the socket.
Keep it away from cutting edges, oily patches and high
temperatures.
- Keep the machine out of reach of children: do not allow
them to approach or touch the machine.
9