Machine Positioning - Sicam COLIBRI BL512 Notice Originale

en 26 | COLIBRI BL512 26" ITAS | Initial commissioning
4.2.6

Machine positioning

1. Put back in place the side door.
2. Loosen the two screws that fix
COLIBRI BL512 26" ITAS to the pallet.
Warning - damage risk!
The lifting belts can crush the flexible supply
pipes of the cylinder or damage the applied
parts of the COLIBRI BL512 26" ITAS.
€
Insert the lifting belts carefully.
3. Insert the appropriate lifting belts (length belt 1: 1
Mt, belt 2: 3 Mt), with sufficient capacity, as shown.
2
!
|
105 890 2010-11-08
1
Warning - tilting danger!
The barycentre of the
COLIBRI BL512 26" ITAS does not lie in its
centre.
€
It is necessary to lift the machine slowly.
4. Lift the COLIBRI BL512 26" ITAS with a lift crane and
install it in the designed area respecting the mini-
mum distances s shown in the picture.
i
For safe and ergonomic use of the
COLIBRI BL512 26" ITAS it is recommended to leave
a minimum of 500 mm space from surrounding walls.
Warning - tilting danger!
During the functioning of
COLIBRI BL512 26" ITAS considerable forces
are exerted.
€
The COLIBRI BL512 26" ITAS has to be fi-
xed in at least 3 points on the floor (screw
holes see chap. 4.2).
i
In each screw hole are placed shock absorbers to
reduce vibrations to the minimum.
Sicam srl società unipersonale