Siemens DE 628M Série Notice D'utilisation page 10

Display
The background lighting and the display readout (e. g. 42 °C)
light up if either the water tap is opened, the rotary selector
switch is turned, or a comfort key is pressed.
The colour of the background lighting changes depending on
the set temperature – the colour ranges from blue (cold) to
red (hot). The background lighting switches off about 10 sec-
onds after the last operation. The display readout (e. g. 42 °C)
dims after approximately 2 minutes.
Comfort keys
Rotary selector switch
10
The display indicates the
current operating state and
makes it possible to change
various settings and retrieve
consumption figures via the
menu.
It is designed to save energy
and remains dimmed when
the appliance is not being
used.
Briefly pressing the , ,
, keys enables you to
directly select the respective
temperature setting (see
chapter "Setting the water
temperature").
Turning and then pressing
the rotary selector switch
allows you to set the select-
ed water temperature and
use the menu (see chapter
"Using the menu").
en
Operating the appliance
Switching the appliance on and off
The continuous-flow heater switches on and heats the water
when the warm water tap is opened. It switches off again if
the water tap is closed.
Setting the water temperature
The water temperature is set by turning the rotary selector
switch.
Briefly pressing the ,
to directly select the temperature respectively saved for each
key. The display shows the set temperature as well as the
associated text and symbol.
Showering
38 °C approx.
Bathing
40 °C approx.
The preset temperatures saved for each key can be changed.
Example: How to change the "Washing hands"
temperature
Briefly press the key.
Turn the rotary selector switch to the desired new
temperature.
Press and hold the
is saved when the display shows the symbol
text "Washing hands" as well as a readout of the new
temperature.
Note: The comfort keys can also be used by several different
users as individual "Temperature keys". Select any of the keys
and save your own specific "wellness temperature".
Note: The factory setting for the water temperature after the
first start-up or a power failure is less than
, , comfort keys enables you
Washing hands
35 °C approx.
Rinsing
48 °C approx.
key. The new temperature setting
and the
35 °C.