Device Description - Storch ProCut top Mode D'emploi

Guarantee, warranty, liability
We guarantee the flawless operation of the device under
the condition that it is duly operated and maintained. The
warranty expires 1 year after the date of purchase (billing
date). It is restricted to material and manufacturing de-
fects. Additional claims and replacement of wear and tear
parts (e.g. cutting wire) are excluded.
Any variations from the intended use will result in expira-
tion of the warranty.
The device must be deployed and operated in accordance
with the conditions specified in this manual. We shall not
assume any liability or warranty for damages resulting from
non-compliance or improper handling.
Device description / ProCut top front view
Fig. 1
Translation of the original instruction
Personnel qualification
The device may only be assembled, commissioned, oper-
ated, maintained and cleaned by authorised, qualified per-
sonnel.
Spare parts, consumables
All of the device components are available from STORCH
and its distribution partners. We recommend that you keep
sufficient quantities of the original cutting wire (item No.
57 33 01, 57 33 02) and fine wire fuses (item No. 57 00
04) in stock.
1 Base plate
2 Corner cutter
3 Mitre tool, corner cutter
4 Mitre tool cutting bow
5 Guide rail corner cutter
6 Fold-out board support, right bearing rail
7 Corner slider right support rail
and corner cutter
8 Right bearing rail
9 Board stop, right rear bearing rail
10 Base/Freestanding support
11 Reproducible slider for mitre cuts
12 On/off switch: left = basic device
Right = corner cutter
13 Cutting bow
14 Depth limiter
15 Left bearing rail
16 Fold-out slider for reproducible
rip cutting
17 Angular scale right bearing rail
52