Denon DJ DS1 Guide D'utilisation page 2

User Guide (English)
Introduction
Box Contents
DS1
(4) Stereo RCA Cables
(2) Serato NoiseMap™ Control Vinyl Records
(2) Serato NoiseMap™ Control CDs
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denondj.com.
Features
3 3
6 6
2
1. USB Port: This connection powers DS1 (when your
4
5
2. Power Light: This LED lights up when DS1 is
3. Inputs: Use standard stereo RCA cables to connect
2 1
4. Phono/CD Selector: Set this switch to match the
5. Grounding Terminal: If you're using phono-level
6. Outputs: Use standard stereo RCA cables to
USB Cable
Software Download Card
User Guide
Safety & Warranty Manual
computer is powered on) and sends to and receives
audio from your computer. Use the included USB
cable to connect this USB port to an available USB
port on your computer.
connected to your computer and powered on.
these inputs to your audio sources. These inputs can
accept line- or phono-level signals. Use the
Phono/CD Selector to set the proper input level.
levels of the audio sources connected to the inputs.
Use the CD (up) position for line-level CD players
and media players or other line-level audio sources.
Use the Phono (down) position for phono-level
sources such as vinyl turntables.
turntables with a grounding wire, connect the wire
to these terminals. If you experience a low "hum" or
"buzz," this could mean that your turntables are not
grounded. Please note that some turntables have a
grounding wire built into the RCA connection and,
therefore, nothing needs to be connected to the
grounding terminal.
connect these outputs to your powered speakers or
amplifier system. The main/master mix from your
computer will be sent out of these stereo RCA
outputs.