Setting The Colour System; Displaying The On-Screen Indications - Sony Black Trinitron KV-14V5D Mode D'emploi

ON
TIMER
SLEEP MENU
OK
SHOW VIEW
2
1 3
TIMER
ON SCREEN
4 5 6
TIMER REC
ON/OFF
7 8 9
TIMER REC
CLEAR
0 C
-/--
PROGR
QUICK TAPE COUNTER
REC
TIMER SPEED RESET
REPLAY PAUSE
INDEX SEARCH
REW FF
PLAY
STOP
Note
The tape operation mode will be
displayed whenever you change the
mode (even when the is turned
off.)

Setting the colour system

Normally, you will want to leave the colour system on AUTO. However, if
you notice streaks appearing on the screen during playback, you may
want to set the colour system to the system that the tape was recorded in.
1
Press MENU.
The main menu appears.
2
Using the + ◊ or – √ buttons, move the cursor (z) to "VCR MODE," then
press OK.
VCR MODE
TRACK I NG CONTROL
OPC : ON
AUTO REPEAT : OFF
FORMAT : NORMAL
COL SYS : AUTO
S e l e c t a n d p r e s s OK
3
Using the + ◊ or – √ buttons, move the cursor (z) to "COL SYS," then
press OK.
4
Press the + ◊ or – √ buttons until the corresponding colour system appears
(PAL or NTSC), then press OK.
VCR MODE
TRACK I NG CONTROL
OPC : ON
AUTO REPEAT : OFF
FORMAT : NORMAL
COL SYS : P A L
S e l e c t a n d p r e s s OK
5
Press MENU to return to the original screen.
Displaying the on-screen
indications
Press to display the following on-screen information. To show only the
amount of tape remaining and linear tape counter on the screen, press
again.
To make the indications disappear, press
Beginning of the tape
4 . 1 2 THU
2 0 : 0 0
Current date and time
until no indications appear.
Amount of tape remaining
End of the tape
S E
Tape operation mode
S E
2 : 0 5 : 1 0
Linear tape counter
25
Basic Operations
GB