Connection Tv To The Internet; Setting Up The Internet Connection; Type 1: Secured Network With Wi-Fi; Protected Setup™ (Wps) - Sony BRAVIA KDL-48R550C Manuel D'instructions

Connection TV to the Internet

Setting up the Internet
Connection
Using the network feature you can connect
the TV to the Internet. The set-up procedure
differs depending on the type of network
and LAN router. Before setting up the
Internet connection, be sure to set up a LAN
router. Check your wireless LAN
environment using the following chart.
Wireless LAN
Secure Wireless LAN?
YES m
Do you use a wireless LAN
router compatible with Wi-Fi
Protected Setup™ (WPS)?
YES m
Type 1*
Wired LAN , Type 4
* Type 1 is easier to set up if your router has an
automatic setting button, e.g. Air Station One-
Touch Secure System (AOSS). Most of the latest
routers have this function. Check your router.
Type 1: Follow the configuration for
Secured network with Wi-Fi
Protected Setup™ (WPS).
Type 2: Follow the configuration for
Secured network without Wi-Fi
Protected Setup™ (WPS).
Type 3: Follow the configuration for
Unsecured network with any type
of wireless LAN router.
Type 4: Follow the configuration for Wired
network set-up.
14
US

Type 1: Secured network with Wi-Fi

Protected Setup™ (WPS)
The WPS standard makes security of a
wireless home network as straightforward
as pressing the WPS button on the wireless
LAN router. Before setting up a wireless
LAN, check the location of the WPS button
on the router and verify how to use it.
For security purpose, [WPS (PIN)] provides a
PIN code for your router. PIN code is
renewed every time you select [WPS (PIN)].
1
2
NO
k Type 3
NO
k Type 2
3
4
Note
• If you use WPS for network set-up, the security
settings of the wireless LAN router activate, and
any equipment previously connected to the
wireless LAN in a non-secure status will be
disconnected from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect. Or,
you can deactivate the security settings of the
wireless LAN router, and then connect the
equipment to a TV in a non-secure status.
• To use the network with IPv6, select [Settings] 
[Preferences]  [Setup]  [Network] 
[IPv6/IPv4 Priority]  [IPv6], then select [Easy] in
[Set up network connection].
• When IPv6 is selected, HTTP Proxy cannot be set.
Press HOME, then select [Settings]
 [Preferences]  [Setup] 
[Network]  [Network Setup].
IP Address setting/Proxy server:
– automatic setting:
[Set up network connection]  [Easy]
– manual setting:
[Set up network connection]  [Expert]
 [Wireless Setup]
Select [WPS (Push Button)] for Push
Button method or [WPS (PIN)] for PIN
method.
Note
Button name of the WPS may differ depending
on the router (e.g. AOSS button).
Follow the instructions on the set-up
screen.