Setup And Firmware Update; European Ce Notice Certification And Safety Approval Information; Fcc Compliance Information - Midland BTX2 PRO Guide D'utilisation

Disabling the VOX feature (Intercom and telephone)
Follow all the procedure described in the previous steps and choose the option of only
one flash (VOX disabled).
Attention! If you disable the VOX feature, you will be able to answer incoming phone calls
only by pressing the "Forward" button.
Wired connection always in background
This feature let you keep the wired connection always on, even when the phone or the
intercom is open (but not when you are in FM radio mode). By default the Background
feature is ON.
Disabling:
› Enter the "Setup" mode:
› Turn off the unit
› Press and hold down the "Middle" button 7 sec., until the Red light is on perma-
nently.
› Press the "Forward" and "Middle" button together for 3 seconds. The blue LED will
flash three times.
› Double click on the "Middle" button to exit the "Setup" mode and use the Midland
BTX2 PRO
Enabling:
Follow the same procedure up described; now the blue LED will flash once.
To exit the "Setup" mode, double click the "Middle" button.

Setup and Firmware update

It is possible to configure and update the firmware of your Midland BTX2 PRO using
the USB connection to your PC. On the Midland web site www.midlandeurope.com
in the Midland BTX2 PRO page you can find the PC software and the new firmware
updates if available. ATTENTION DO NOT CONNNECT THE UNIT TO THE PC
BEFORE you DOWNLOAD AND INSTALL THE SOFTWARE.
14
Use at your own risk
The use of the device will impair your ability to hear other sounds and others around
you.
Listening to music or speaking on a telephone may prevent you from hearing others
around you and distract you from riding safely. The use of such device while riding may
endanger you and others, and its use, in some areas, could not be allowed.
Using this device at a high volume may result in permanent hearing loss.
If you experience ringing in your ear or any other hearing related pain, reduce the volu-
me or discontinue using this device. With continued use at high volume, your ears may
become accustomed to the sound level, which may result in permanent damage to your
hearing. Please use this device at a safe volume level.
www.midlandeurope.com
Warranty
The warranty lasts 24 months for the main device and 6 months for the accessories
(batteries, chargers, antennas, headsets and microphones). For further information
about the warranty, please visit www.midlandeurope.com.
European CE Notice Certification and Safety Approval
Information
This product is CE marked according to the RED Directive 2014/53/UE and is free
use in all the EU countries. Users are not permitted to make any changes or modifi-
cations to the device. Modifications which are not expressly approved by the producer
invalidate the warranty card. For further information, please go to our website: www.
midlandeurope.com

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation. You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user's authority to
operate the equipment. "This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, inclu-
ding interference that may cause undesired operation of the device." "This equipment
complies with Industry Canada radiation exposure limits set forth for an uncontrolled
environment. "NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radiofrequency energy and,
if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
www.midlandeurope.com
› Reorient or relocate the receiving antenna.
› Increase the separation between the equipment and receiver.
› Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
› Consult the dealer or an experienced radio/TV technician for help.
15