Installation - Franke EURO PRO 30 Mode D'emploi Et D'entretien

INSTALLATION

1. If possible, disconnect and move freestanding or slide-in range from cabinet opening to pro-
vide easier access to rear wall. Otherwise put a thick, protective covering over countertop,
cooktop or range to protect from damage or dirt. Select a flat surface for assembling the
hood. Cover that surface with a protective covering such as a blanket or cardboard. Remove
hardware package.
10" 9/16
7/8"
2. Add wood filler strips as needed to cabinet bottom. Drill four 3/16" clearance holes for hood
mounting screws.
Wall
3. Cut 6 1/2" dia. hole in cabinet bottom as shown.
EN
Preparation
13" 1/2 – 30" model
16" 1/2 – 36" model
Wall
6" 1/2 Dia.hole
Centerline
Centerline
4"
Wood filler strips
(recessed cabinet
bottoms only)
3/16" clearance
holes
8 8