Publicité
Les langues disponibles
Les langues disponibles
Tuning FM stations
•
Press the SCAN button to start searching for stations and automatically storing them in 20 available presets.
•
The station search process takes a few minutes. After searching, the radio retunes to the first station in the
playlist, if available.
To recall preset 1–20:
•
Press briefly the PRESET button.
•
Turn the TUNING knob repeatedly to select the number of the stored station you want to play.
•
To play a stored station, briefly press the TUNING / SELECT button.
For manual tuning, turn the TUNING knob.
The radio will search and the tuning frequency will be displayed during the search. When a usable station is
detected, the radio stops tuning and starts playing the station. If RDS data are available, the station name and
radio scrolling text are displayed. If RDS data are not available, the tuned frequency is displayed.
Display mode setting
The bottom line of the display can be switched to show various items of information that can be transmitted
using a FM station.
Information display selection:
•
Press INFO on the front panel repeatedly to change the information displayed when playing a FM radio
station.
•
The full range of display options is shown below. Some stations might not broadcast all of these options.
Sound mode> Radio text> Program type> Signal strength> Time / Date> Frequency
FM Mono / Stereo / Auto options
In FM radio mode, press TUNING / SELECT repeatedly to set the sound mode to AUTO or MONO.
SOUND SETTING: This option allows you to set the radio to receive FM in Auto (Mono / Stereo) or Mono mode
only. This can be useful if the signal is weak and the transmission is noisy.
CD playback
Compatible CD
This player can play CD and MP3 audio format.
To start CD playback:
•
Set the function selector to CD / USB, and using the MODE button select the CD mode.
Inserting disc:
•
Slowly lift the CD door on the top of the unit.
•
Carefully place the disc on the center spindle with the label side up.
•
Once the disc is in place, press the center of the disc until you hear a click.
•
Close the door of the CD compartment. After a few seconds, the disc and the data stored on it will be read.
Ejecting the disc:
•
If the disc is playing, press STOP and wait a few seconds for the disc to stop.
•
Slowly lift the CD compartment door. Grasp the sides of the disc and pull it out of the CD compartment.
Play / pause CD playback
•
Insert a CD in the device.
•
Press SCAN / u to start the CD playback.
While playing the CD you can stop the playback any time by pressing SCAN / u. Press again to resume
•
playback.
Track selection:
•
To select the p[revious or next track from the disc, turn briefly the TUNING ., > knob.
18
Publicité
