Use - Keeping Water Warm; Cleaning And Care - Unold 18580 Notice D'utilisation

USE - KEEPING WATER WARM

1. With the keep warm function it is possible to keep water that has already
been heated at the selected temperature.
2. Prepare the appliance as described above, however do not switch it on yet
via the " " button.
3. Select the desired temperature to which the water should be heated.
4. Now press the "
button and the display of the selected temperature will flash three times to
indicate that the appliance is in keep warm mode.
5. The keep warm mode will be maintained for a maximum of 120 minutes,
then the appliance will switch off for safety reasons.
6. During keep warm mode the display of the selected temperature and the
UNOLD logo are illuminated.
7. If you want to end keep warm mode, switch off the appliance via the "
button.
8. Keep warm mode will end automatically when you take the appliance off of
the base.
Boiling water can cause scalding. Therefore, please handle the appliance
with care when it contains hot water.

CLEANING AND CARE

Before cleaning, always turn off the appliance and unplug it from
the electrical outlet.
Allow the appliance to cool before cleaning it.
1. Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little dishwashing
detergent.
3. Do not use sponges that can scratch, abrasive scouring agents, steel wool,
metal objects, disinfectants or hot cleaning agents, as they can damage the
appliance.
4. The appliance must be completely dry on the outside before you use it
again.
20
Copyright UNOLD AG | www.unold.de
" button and keep it depressed for three seconds. This
"