Weller WT 2M Traduction De La Notice Originale page 8

Technical Data
Soldering station
Dimensions L x W x H
Fuse
Weight
Mains supply voltage
Power consumption
Safety class
Temperature range
Tool dependent
Temperature accuracy
Temperature stability
Overload cut-out (150 W)
To avoid overloading a WT 2M station the power is limited to
150 W (see matrix 10). With a required tool performance of
both channels of more than 150 watts, a channel is automati-
cally deactivated (Auto-Off).
Symbols
Caution!
Warning! Risk of burns!
Read the operating instructions!
Before performing work of any kind on the
unit, always disconnect the power plug from
the socket.
ESD-compatible design and ESD-compatible
workstation
Equipotential bonding
CE mark of conformity
Fuse
British Conformity Mark
Safety transformer
WT 2M
(mm) 150 x 130 x 101
(Inch) 5.91 x 5.12 x 3.98
230 V (A) T0,8
120 V (A) T1,6
100 V (A) T2,0
(kg) 2,92 kg
( V / Hz) 230 /50; 120 /60;
100 /50 /60
(W) 150
I, antistatic housing
III, Soldering tool
(°C) 50 - 450 / 550
(°F) 150-850 / 950
(°C/°F) ± 9 / ± 17
(°C/°F) ± 2 / ± 4
Disposal
Do not dispose of electric tools together with
household waste material! In observance of Eu-
ropean Directive 2012/19/EU on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools
that have reached the end of their life must be
collected separately and returned to an environ-
mentally compatible recycling facility.
Disposal - UK
Do not dispose of electric tools together with
household waste material! In observance of Bri-
tish Directive 2013 No. 3113 on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools
that have reached the end of their life must be
collected separately and returned to an environ-
mentally compatible recycling facility.
EN
ENGLISH
21