Introduction / Safety advice
This item is an illuminated decoration.
Do not use this light for room lighting or
as a night light. This is a specialist product,
as the chromaticity values lie outside the ranges
stated in brackets.
Chromacity values: (x<0.270 or x > 0.530);
(y<-2.172 x² or y >-2.3172 x² + 2.3653 x -0.1595).
Included items
Check that all the items and accessories are present
and that the lamp is in perfect condition immediately
after unpacking.
1 LED Party Light, model 14126106L (E27) or
14126206L (E14)
1 Set of instructions for use
Description of Parts
LED Party light
1
Lamp socket (not included)
2
Technical Data
Item number:
14126106L
Operating voltage: 230 V∼, 50 Hz
Lamp socket:
E27
Rated power:
RGB LED 3 W
Protection class:
II /
Item number:
14126206L
Operating voltage: 230 V∼, 50 Hz
Lamp socket:
E14
Rated power:
RGB LED 3 W
Protection class:
II /
Safety advice
The right to claim under the guarantee shall be
rendered invalid in respect of damage caused by
the non-observance of these operating instructions!
No liability is accepted for consequent damage! No
liability is accepted for damage to property or
18 GB
persons caused by improper handling or non-ob-
servance of the safety advice!
FATAL INJURY AND ACCIDENT
HAZARD FOR TODDLERS AND
SMALL CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
poses a suffocation hazard. Children frequently
underestimate the dangers. Please always
keep the product out of the reach of children.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, so
long as they are supervised or instructed in
the safe use of the device and understand the
associated risks. Do not allow children to play
with the device. Cleaning and user maintenance
must not be performed by children without
supervision.
Exposure to certain strobe lights or lighting effects
can cause epileptic seizures or unconsciousness
in some people. If you experience symptoms
of an epileptic seizure, seek immediate medical
attention.
To avoid danger to life from
electric shock
Never open any of the components of the elec-
trical equipment (i.e. switch, lamp socket, etc.) or
insert any objects into the components. This will
pose the risk of fatal injury from electric shock.
Before installation ensure that the available
mains voltag e agrees with the operating volt-
age required for the lamp (see „Technical Data").
To avoid danger of fire
and injury
CAUTION! RISK OF BURNS
DUE TO HOT SURFACES!
Ensure the lamp has been switched off and al-
lowed to cool before you touch it. In this way
you will avoid the danger of burns.
RISK OF