Velleman NETBPEM3 Mode D'emploi page 3

4.1 Setting of the Current Time and Weekday
1. Push and hold + and – simultaneously for ±5s to enter the
programming mode.
2. Change the value of the blinking item with + or – and select the next
item by pressing MODE.
3. When finished programming the time and date, press MODE to
program cost tariff n° 1.
4.2 Setting of Cost Tariff N° 1
1. Change the value of the blinking item as per above.
2. Begin with programming the start time of the day tariff.
3. Once the start time programmed, continue with entering the day tariff.
4. Press MODE to program cost tariff n° 2.
4.3 Setting of Cost Tariff N° 2
1. Change the value of the blinking item as per above.
2. Begin with programming the start time of the night tariff.
3. Once the start time programmed, continue with entering the night
tariff.
4. Press MODE to confirm the programmed data.
4.4 Reset
1. Push and hold MODE, + and – simultaneously for ±5s to delete all data (except current time and day of
the week).
5. Screen Description
5.1 Current Time, Weekday, Load Power and Current Cost per Hour
5.2 Total Recorded Time, Total Used Energy and Accrued Energy Cost
V. 03 – 29/09/2016
NETBPEM3/NETBSEM3
Current time
Load power
Current cost/h
Day of the week
Total recorded time
Total used energy
Accumulated energy cost
3 ©Velleman nv