Storch 009ST Traduction Des Instructions D'origine page 62

Gun Trigger Lock
To prevent injury when the gun is not in use, always engage the gun's trigger lock
if unit is being shut down or left unattended.
Trigger
It is easy to convert the pistol from a 4-finger trigger to a 2-finger trigger. Select the
trigger for your preferred handling. How to replace the trigger:
1. Unlock the protective clip for the pistol trigger.
2. Swivel the protective clip to the side.
3. Unscrew the retaining nut from the pistol trigger axle bolt, bolt from the pistol
housing.
4. Remove trigger.
5. Fit the other trigger in the reverse order.
Connect the pistol to the sprayer
Make sure the sprayer is switched off and disconnected from the socket. Refer to the
sprayer's operating instructions for information regarding venting and spraying.
1. Attach the Airless hose to the sprayer's material outlet.
2. Attach the other end of the Airless hose to the pistol swivel joint. Securely tighten all
connections with two spanners (one on the swivel joint and one on the hose).
Affixing the nozzle and tip guard
To avoid serious injury from skin injection do not put your hand in front of the spray tip
when installing or removing the spray tip and tip guard.
Original instruction 62