Basic Operation - Teac CR-H500NT Mode D'emploi

A
How to turn the unit on or off
A
Press the STANDBY/ON switch to turn the unit on or
off.
The Standby/On indicator turns blue when the unit is
turned on.
< When you turn on the system, the source that was
selected last time will start playback automatically.
How to select source
B
Every time the SOURCE button is pressed, the mode is
changed as follows:
TUNER USB/iPod
CD AUX2
Or press the TUNER, iPod/USB, PHONO, AUX 1/2 or CD
button on the remote control unit to select the source
directly.

Basic Operation (1)

C
B
Standby/On indicator
PHONO
AUX1
Adjust the volume
C
To protect the speakers from a sudden high-volume
sound, gradually turn up the volume to the required
level with the VOLUME knob.
D Muting
To mute the sound temporarily, press the MUTING
button. To cancel muting, press the MUTING button
again or change the volume setting.
Dimmer
E
Press the DIMMER button to dim the display.
Press the button again to cancel the dimmer function.
< This function will be cancelled when the unit is turned
off.
17