Folder Search - Teac CR-H500NT Mode D'emploi

D
To skip to the next or a previous track/file
During playback , press the skip/scan but tons
(.m/,/) repeatedly until the desired track/
file is found. The selected track/file will be played from
the beginning.
On the remote control unit use the skip buttons
(.//).
In the stop or pause mode, press the skip/scan buttons
(.m/,/) repeatedly until the track/file you
want to listen to is found. Press the play/pause button
(y/J) to start playback the selected track/file.
< When the .button is pressed during playback,
the track/file being played will be played from the
beginning. To return to the beginning of the previous
track/file, press the .button twice.
< During programmed playback, the next or previous
track/file in the program is played.
E Search for a part of a track/file
During playback, hold down the skip/scan buttons
(.m/,/) and release it when the part you
want to listen to is found.
< In USB mode, no sound is emitted while searching.
< The unit stops when the end of the last track/file is
reached.

Folder Search

You can select a folder and a file during playback or when
stopped.
Press the scroll buttons (˙/¥) to select a folder.
1
Press the ENTER button.
2
If you want to select a file, press the scroll
3
buttons (˙/¥).
< The selection moves within the folder.
Press the ENTER button.
4
Playback starts from the selected file.
21