Internet Radio Initial Setup - Teac CR-H500NT Mode D'emploi

When you use the internet radio function for the first
time, the unit starts an initial setup procedure to connect
to the Internet.
1 Select "Internet radio" by pressing the BAND
button repeatedly.
Initial setup wizard starts.
Select your country/area.
2
Turn the MULTI JOG knob to select the item, and then
press the ENTER button.
›Most of Europe
USA
< To go back to the previous screen, press the BACK
button.
Select a network name you want to use.
3
Turn the MULTI JOG knob to select the item, and then
press the ENTER button.
›005AD904JM2
[Rescan]
< To use a wired Internet connection, select "[Wired]".
36

Internet Radio Initial Setup

2 3 1
4 Enter the correct password for the network if
required.
< See "How to input characters" below.
Now the unit starts to connect to the Internet.
When connection is established successfully, the
internet radio menu is displayed. See the next page to
select a station.
< If you have a problem connecting to the Internet, see
page 53.
How to input characters
MULTI JOG
Key: Ge
0123456789<EC
1. Turn the MULTI JOG knob to select a set of
characters.
2. Press the BACK button and the FWD button to
select the character you want to input.
3. Press the ENTER button to input the selected
letter.
Repeat steps 1 to 3 to input next characters.
<: Deletes the last character.
E: Enters your input.
C: Cancels the operation and goes back to the
previous screen.
Characters you can input
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
(space)!"#¤%&'()*+,-./:;<=>?@[\]–_||`{|}¯
ENTER
BACK FWD