Before Recording; Recording To Usb - Teac CR-H500NT Mode D'emploi

Before Recording

CAUTION
< Do not disconnect the USB storage device during
recording.
Do not disconnect the power cord during recording.
It may cause damage to the products.
< Adjust the volume of the external audio source to
suitable level before recording. If not, the recording
quality becomes poor.
Note
< The recorded files are saved in the AUDIO folder.
< The FILE NAME is fixed up automatically in regular
sequence like "Audio001.MP3", "Audio002.MP3", .......
For Example:
If there are "Audio004.MP3" and "Audio009.MP3" files
in the AUDIO folder, and you make a recording, a new
file will be "Audio010.MP3".
< Before recording check the remaining capacity of the
USB storage device using your PC.
You cannot check the remaining memory capacity
with this unit.
< This unit can record up to 2000 files to the USB device.
< The maximum time of the recorded file is 90 minutes
and new file is created when the time exceeds 90
minutes. When a new file is created, recording will
pause for a few second.
< You cannot record music from an iPod.
< A track recorded onto a USB storage device is
converted to a MP3 file at a bit rate of 128 kbps.
28

Recording to USB

You can record a source of radio broadcast and external
device to the external USB storage device as MP3 files.
Connect the external USB storage device to the
1
USB port of the CR-H500NT.
2 Select a source to be recorded.
< iPod/USB can not be selected.
Press the RECORD button.
3
Recording starts.
< You cannot record to an external USB storage device if
there is no free space or the device is locked.
To stop recording
Press the stop button (H).