Basic Operation - Teac AG-H600NT Mode D'emploi

1 2
Press the power switch to turn the unit on.
1
The standby indicator lights blue.
< When the system control functions are activated, always set this
switch on, and turn the unit on/standby using the remote control
unit.
2 Select a source.
Each time you press the SOURCE button or the BAND button on
the remote control unit, the source changes as follows:
Internet radio
Music Player
< You can also use the TUNER, CD, iPod, AUX and PHONO buttons
on the remote control unit to select each source.
12

Basic Operation

4
standby indicator
CD
iPod
AUX
SOURCE
button
PHONO
DAB
BAND
FM
button
AM
3 Start playback of the component, or tune in a radio station
on this unit.
Please read the instructions of each component.
4 Gradually turn up the volume to the required level by
turning the VOLUME/SET knob.
Muting
Press the MUTING button to mute the sound temporarily.
< To restore the sound, press the MUTING button again.