Basics - Kenwood KDC-X500 Mode D'emploi

BASICS

Faceplate
Detach button
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information
* For
: The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
Volume knob Display window
USB cable from the rear of
the unit
How to reset
On the faceplate
Press .
• Press and hold to turn off the power.*
Turn the volume knob.
Press repeatedly.
Press DISP repeatedly. ( 25)
:
Press the switch twice
within 5 seconds after
detaching the faceplate.
Remote control (RC-406) (
supplied for
)
Remote sensor (Do not
expose to bright sunlight.)
Remote control functions are not available for
.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Press or .
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
/
Pull out the
insulation sheet
when using for the
first time.
3
ENGLISH