Basics - Kenwood KDC-X397 Mode D'emploi

BASICS

Faceplate
Volume knob
(turn/press) Loading slot
Detach
button
To Do this (on the faceplate)
Press L SRC.
Turn on the power
• Press and hold to turn off the power.*
Adjust the volume Turn the volume knob.
Press L SRC repeatedly.
Select a source
Change the display Press SCRL DISP repeatedly.
2
information* • Press and hold to scroll the current display information.
KMR - 355U
*
1 For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
KDC - MP255U KDC - MP155U
* 2
For /
KDC - X397
Display window
KDC - X397 KDC - 355U KDC - 255U
KDC - 155U KMR - 355U
KDC - MP255U
KDC - MP155U
: You can also select to turn off the display information by pressing SCRL DISP repeatedly.
Attach
Detach
How to reset
Your preset adjustments
will also be erased.
1
Remote control (RC-406)
KMR - 355U
(not supplied for )
Remote sensor (Do not expose
to bright sunlight.)
* Not used.
How to replace the battery
Do this (on the remote control)
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Press VOL or VOL .
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( not available )
Pull out the
insulation sheet
when using for
the first time.
ENGLISH | 3