Electronic Model Troubleshooting; Mechanical Model Troubleshooting; Dimensions - NEW POL XS 251 CO Mode D'emploi

GB
Always add a softener to the
wash. This will improve the
drying results and reduce
drying time.

ELECTRONIC MODEL TROUBLESHOOTING

If the machine is not working
properly, carry out the following
checks before calling for techni-
cal assistance:
1. The program will not start:
The plug is not inserted
in the mains socket.
The door is not closed
properly.
The ON/OFF button has

MECHANICAL MODEL TROUBLESHOOTING

If the machine is not working
properly, carry out the following
checks before calling for techni-
cal assistance:
1. The program will not start:
The plug is not inserted
in the mains socket.
The door is not closed
properly.
The ON/OFF button
has not been pressed.
Width cm:
Height cm:
Dimensioni:
Depth cm:
Max. capacity
Power rating
26
MAINTENANCE
RECOMMENDATIONS
The layer of fibre threads in
the filter is not the result of
the drying procedure.
The threads come from the
not been pressed.
2. The program has been set,
the indicator light is flash-
ing, but the drier does not
start:
position the programmer
on "STOP", wait for the
audible signal and set the
program required.
3. The drier does not dry
within the set time:
The START button has
not been pressed.
2. The program has been
set,the indicator light is
flashing, but the drier
does not start:
position the program
mer on "STOP", wait for
the audible signal and
set the program re quired.
3. The drier does not dry

DIMENSIONS:

Voltage
fibres of fabrics damaged or
unthreaded during the wash
and, above all, as a result of
wear.
Check that the filter is
clean.
Check that the correct
program has been se-
lected.
Check that the air sup
ply is not blocked.
If the problem is not
caused by one of the
above, call technical
assistance.
within the set time:
Check that the filter is
clean.
Check that the cor
rect program has
been selected.
Check that the air sup
ply is not blocked.
If the problem is not caused by
one of the above, call technical
assistance.
60.0
85.0
60.0
5 kg ( dry )
see characteristics plate
see characteristics plate
SM1733