Installing The Appliance; Levelling - NEW POL XS 251 CO Mode D'emploi

1
Position the drier in a
well-ventilated room.
Do not cover the ventila-
tion grills on the front and
back (fig. 1 and 2) and do
not place the drier on
thick carpet.
Position the filters (fig. 10
& 12).
Clean the drum using a
soft cloth to remove any
dust or grease.
Do not install the drier in
rooms subject to freezing
temperatures as these could
damage the electronics.
Connecting the condensa-
tion drain to the drainage
system.
The condensation can be col-
lected in the reservoir (fig. 11)
or, alternatively, the hose can
be connected directly to the
drainage system.
In this case, the collected wa-
ter is pumped out.
To connect the condensation
hose directly to the drainage
system, proceed as follows:
before starting any opera-
tions, unplug the appliance
from the mains socket.
remove the grill on the
back of the drier after first
removing the screw (fig. 3).
remove the hose clip us-
ing a pair of pliers and
SM1733

INSTALLING THE APPLIANCE

2
2
4
carefully remove the
hose (fig. 4).
place the hose on the
front nozzle and replace
the hose clip.
position the hose sup-
plied on the free nozzle
The appliance can be levelled by
rotating the adjustable feet.
The appliance must be levelled in
order to ensure its correct opera-
tion.
3
5
(fig. 5). Place the hose
clip supplied in position.
pass the hose through
the grill (fig. 5) while refit-
ting the grill itself.
insert the hose in the
drainage pipe.

LEVELLING

6
GB
17