Publicité
Les langues disponibles
Les langues disponibles
Recording sessions
Videos are divided into 10-min recordings.
When the memory is full, the video camera turns off automatically. To be
able to record again, free up storage space by deleting all or part of video
recordings.
How to view / delete / download a video
Connect the video camera to your computer using the supplied USB
cable. The computer automatically detects the video camera.
You can view videos using:
the media player of your choice from your PC,
only VLC media player from your Mac.
Setting the date and time
To set the date and time of videos, connect the camera to your computer
using the supplied USB cable, then open the text file "Time".
Set the local date and time in the following format:
E.g. 16h30mn20s, January 02, 2020 must be set as follows: 2020-01-02
16:30:20
Troubleshooting
Should your product stop working or develop a fault, first read this user's
manual again. Make sure that you are using the product correctly. Also,
check the memory, which might be full.
In the event of a dysfunction, reset the product by pressing the "Reset"
pinhole (see diagrams under Product description §). The video camera
must either be on or be connected to your computer.
You can also easily format the camera memory following these steps:
Connect the video camera to your computer.
Right-click the "removable disk (X:)" icon and select "format".
Tick the "quick formatting" box and click "Start" to start formatting.
15
Publicité
