SOLAC AS3250 Mode D'emploi page 13

AS3250.book Page 13 Thursday, July 24, 2008 5:22 PM
26 Tip for vacuuming grooves and corners
27 Telescopic metal tube
28 Upholstery brush/ furniture brush
3 Use
Non-Stop Cyclone System cyclonic Technology
The vacuumed dust enters the dust container (11) and remains suspended
thanks to the Non-Stop Cyclone System cyclonic technology. Any dust
particles that escape from the outer dust container chamber are retained in
the inner chamber (12) before passing through the motor protection filter
(16), thereby ensuring that the air leaving the appliance is free from dust
particles.
Z
This appliance has been designed exclusively for vacuuming floors,
carpets, furniture and fabrics. Do not use it for any other purpose.
Z
Never vacuum live ash, splinters, sharp objects, or liquids.
Z
Never vacuum lit matches or cigarette butts. Do not vacuum toxic
material (ammonia, etc.).
Z
Completely remove all the elements used for transportation and
packaging.
‹
Unplug the appliance from the mains before adding or removing any
accessories or performing any maintenance tasks.
‹
Do not use the appliance above the height of the power cord.
1 Check that the dust container (11) and filters (14 and 16) are fitted
correctly. See following section (Cleaning and Conservation).
2 Insert the flexible hose (17) into the connection (9) until it clicks into
place. When you want to remove the hose, press both release tabs (25)
at the same time.
3 Insert the telescopic metal tube (27).
4 Prepare the accessories required for the surface you want to clean.
Insert the required accessory into the telescopic metal tube (27).
All-purpose brush for floors and carpets (24)
It can be used on all types of floors, as it is retractile and can adapt to the
surface to be cleaned. To change the cleaning position of the brush, press
the brush button (23) with your foot. We recommend cleaning hard floors,
wood and parquet with the fibre brush extended, and cleaning carpets and
rugs with the fibre brush retracted.
Use
en
13