Charger - Pedelec Impulse Xion Mode D'emploi Original

8 Charger

Read the type plates on the charger before using it for the
first time.
You can charge your Pedelec with Xion drive directly via a
charging socket in the battery. The battery can remain on
the Pedelec whilst the charging operation is in progress.
Charging the battery
Alternatively, you can take the battery out of its holder
and charge it elsewhere.
This is recommended if it is cold outside, in order to
charge the battery in a warmer room. The battery can be
charged at temperatures between 0°C and 45°C.
Do not use other chargers. Only charge the battery us-
ing the charger provided, or a charger approved by us.
• If a charging fault occurs, the LED in the charger
flashes red. In this case, the charging current is too
high.
• Disconnect the battery from the charger and then
connect it again. If the error message still appears,
the battery and charger must be checked by a spe-
cialist dealer.
28 VIII User Manual Pedelec Xion
If used incorrectly, the device may be damaged or
inflict injuries.
› Before cleaning the charger, always pull the plug
out of the socket to avoid a short-circuit and/or
physical injury.
› Only use the charger in dry rooms.
› Only place the charger in a secure stable position
on a suitable surface.
› Do not cover the charger or place any objects on
it as otherwise it could overheat and catch fire.