Installation Instructions - Truma AS99 Mode D'emploi Et Instructions De Montage

Installation instructions

Residual gas: Do not
smoke, avoid open
flames!
Gas filter installation must al-
ways be carried out by an expert.
Pay attention to flow
direction and installation
position! The gas filter must
always be installed in a vertical
position (with saturation indica-
tor at the bottom).
The optionally available retaining
bracket (part no. 50020-87000)
can be used to install the gas
filter if necessary.
The installation of the gas filter
must not adversely affect the
secure attachment of the gas
pressure regulation system.
14
The seals of the HP hoses
and the filter cup O-ring
must be properly inserted and
undamaged.
Installation without
accessories
Fitted directly to gas pressure
regulation systems with 90°
angled inlet screw connection
M20 x 1.5 external thread.
Fitted directly to two-cylinder
changeover systems with hori-
zontal inlet screw connections
M20 x 1.5 external thread (2 gas
filters required).
Installation with accessories
Fitted to gas pressure regulation
systems with vertical inlet screw
connection M20 x 1.5 external
thread using optionally avail-
able 90° angle union (part
no. 50020-62000).