weasy TB600 Manuel D'utilisation page 4

• Do not operate this appliance if it has a damaged cord or
plug, if it is not working properly or if it has been damaged
or dropped. If the supply cord is damaged, it must be
• replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
• This device is not intended for use by persons with
reduced capacity on the physical, mental or sensory or
lack of experience and knowledge (including children),
unless he has them was asked to monitor or if they have
had instructions on the use of the appliance by a person
responsible for their safety. Children should be
supervised to ensure they do not play with the device.
• This unit is not intended for use with an external timer or
a separate remote control system
WARNING: THIS APPLIANCE MUST BE EARTHED.
CAUTION HOT SURFACE
• Keep the appliance away from children.
• The socket used should be in accordance with the
plug of the appliance.
• Make sure that the temperature controller is on the
position of "off" before plugging. After plugging into
the power socket, the indicator "POWER" comes on,
showing the appliance is powered. When only the
indicator "POWER" comes on, the appliance is not
heated. If the using temperature exceeds rated
temperature after use, the indicator "POWER" still
works and at this time, the appliance maybe very hot.
• Do not heat without food inside.
• Do not open the lid when frying.
• The surface is hot when frying. Never touch the fryer