AEG MC 4406 CD/MP3 Mode D'emploi & Garantie page 46

NOTE: Turn the volume of the external device to maximum.
USB Connexion (7)
This device has been developed in accordance with the latest
technical developments in the USB fi eld. Unfortunately the large
number of different types of USB storage media on offer today
makes it impossible to guarantee full compatibility with all USB
storage media. For this reason there may be problems in rare
cases with playing back from USB storage media. This is not a
malfunction of the device.
1. In order to switch on the device please press the ON/
STANDBY switch (1).
2. Open the OPEN (20) fl ap.
3. Turn the function selector switch (6) to the CD/USB/SD
position.
4. Connect a USB storage medium.
5. Now press the FUNCTION button (19/10) to select the
UDISC mode. The device is now in USB mode. After a few
seconds the total number of folders/songs/tracks is shown in
the display (13).
(F = Folders, T = Songs/Tracks)
6. Press II (14/3) to play back the music data.
7. For operating instructions please see the section "Playing
CDs/MP3s".
CAUTION:
Before removing the USB storage medium switch the device
off with the ON/STANDBY switch (1) or turn the function
selector switch (6) to TUNER (AM or FM).
NOTE:
If you have problems with operation using the USB connexion,
please use an appropriate adapter cable and proceed as
described under LINE IN.
SD/MMC Card Slot (22)
1. Press the SD/MMC card into the opening provided until it
clicks into place.
2. Now press the FUNCTION button (19/10) to select the
SD/MMC mode. The device is now in SD/MMC mode.
3. Press II (14/3) to play back the music data.
For operating instructions please see the section "Playing
CDs/MP3s".
NOTE: Press the SD/MMC card again in order to remove it.
Listening to the Radio
1. Open the OPEN (20) fl ap.
2. Turn the function selector switch (6) to the TUNER position
(AM or FM).
VHF Stereo = FM, Medium wave = AM (mono)
3. Tune in the desired station with the station adjustment knob
TUNING (8).
46
05-MC 4406 AEG New4 46
4. The FM/ST control lamp „
lights up when you have selected FM stereo and the station
is being received in stereo quality. If reception is too weak
and there is noise on the station being received, this lamp
will fl icker. Try to improve reception by turning and bending
or twisting and altering the length of the antenna (24). In the
case of FM stations you can use the FM ST./MONO button
(9) to switch between MONO and STEREO reception.
Where reception is bad we recommend switching to MONO.
5. An aerial is integrated into the device for the reception of
AM stations. The machine can be aligned to the station by
turning it. In this frequency band programs are transmitted in
„mono" only.
Playing CDs/MP3
This is how you play a CD
1. Turn the function selector switch (6) to the „CD/USB/SD"
position.
2. Now press the FUNCTION button (19/10) to select the CD
mode. The device is now in CD mode.
3. In order to open the CD compartment (11), press the OPEN/
CLOSE button (12).
4. Insert an audio CD with the printed side facing upwards on
to the central cone so that the CD clicks into place and then
close the lid of the CD compartment.
5. AUDIO CDs:
In the display the symbol "CD" appear together with the
number of tracks and the total playing time. Press the
II button (14/3) to play back the CD. The CD is played
from the fi rst track onwards. The track currently being played
and the time that has elapsed are shown in the display.
CDs in MP3 Format:
In the display the symbol "MP3" appear together with the
number of folders e.g. F04 and the total number of tracks.
Press the II key (14/3) to play the CD. The CD is played
back from the fi rst track onwards and from the fi rst folder.
The song currently being played and the time that has
elapsed are shown in the display. The individual folders can
be selected with the DN/UP FOLDER buttons
(6 on the remote control) and FOLDER UP (10 on the
device).
6. To remove a CD, press the
remote control), open the CD deck with the OPEN/CLOSE
key (12) and take out the CD carefully.
Always keep the CD deck closed.
NOTE:
• If a disc is inserted incorrectly or no disc is inserted, the
letters „READING", and „NO DISC" appear in the display.
• Playback of CDs produced by the user cannot be guaran-
teed due to the large variety of software and CD media
available.
" (in the display) only
STOP key (17) (4 on the
31.10.2006, 14:39:55 Uhr