DHG SystemRoMedic BureDouble 2.0 Manuel D'utilisation page 7

5. Raising/Lowering the Frame
The desired height is adjusted with Arrow <UP> or Arrow <DOWN>.
Adjust bottom frame using <WIDER> arrow or <NARROWER> arrow.
Handset from Plus also have charge indicator / battery (low, medium, high) and Ser-
vice indicator (see further under "16 Hand Control Plus").
6. Adjusting the Handles
To adjust handles to the desired position; loosen screw, adjust handle,
.
tighten screw
7. Left and Right Adjustment of Armrests
The handles are adjusted to the desired position by:
Loosening the knob of the handles adjustable locks.
8. Locking Castors/Unlocking Castors
Bure Double is fitted with braked casters with directional locking
(green pedal). Depress the foot brake to set it and lock the castor.
To unlock, press down on the protruding part of the brake. Locking
affects rolling and swiveling.
9. Control Box Wiring
Remove the control box cover to make the connections as described
below. Use a screwdriver or similar; refer to the special labels on the
control box.
NOTE: Make sure that plugs are connected to the correct sockets
otherwise the actuators can be damaged.
1. Socket for the height adjustment actuator.
2. Socket for the width adjustment actuator.
3. Hand control socket.
4. Battery terminal socket.
5. Plug socket (NOTE: Plugs must ALWAYS be connected to the
control box for IP classification to be valid).
I F U
1 2
3
4
5
7