LaserLiner SmartCross-Laser Mode D'emploi page 9

laser devices are in operation.
– In public areas shield off the laser beam with barriers and
partitions wherever possible and identify the laser area with
warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with the
EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. Electronic devices can potentially
cause hazards or interference or be subject to hazards or
interference.
!
Always turn off all lasers and latch the pendulum in
place before transporting, ON/OFF switch in its „OFF"
position!
1
Inserting batteries
Open the battery compartment
and insert batteries (2 x type AA)
according to the symbols. Be
sure to pay attention to polarity.
1
7
SmartCross-Laser
1
Laser line selection button /
Hand receiver mode
2 LED levelling
2
red: levelling off
green: levelling on
3
3 Battery compartment
(backside)
4
4 ON / OFF switch,
transport retainer
5
5
Laser output windows
6 1/4" tripod threads (bottom)
7 LED hand receiver
6
mode
–
–
+
EN
09