LaserLiner SmartCross-Laser Mode D'emploi page 8

Completely read through the operating instructions,
the 'Warranty and Additional Information' booklet as
!
well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe
place and if the laser device is passed on, this document
must be passed on with it.
Function / Application
Automatic cross-line laser
– Exact horizontal and vertical alignment of objects
– Easy alignment of inclinations
– Integrated hand-held receiver mode for outdoor applications
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out
of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety
specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the
beam.
– Under no circumstances should optical instruments (magnifying
glass, microscope, binoculars) be used to look at the laser
beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014/AC:2017