Dometic Waeco CoolMatic MR07 Instructions De Montage Et De Service page 24

Safety instructions
A
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.
I
NOTE
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
Fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2 Safety instructions
The manufacturer accepts no liability for damage in the following cases:
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
2.1 General safety
WARNING!
!
 Before you start up the appliance for the first time, check that the
operating voltage matches the battery voltage (see type plate).
 If the cable is damaged, it must be replaced to prevent possible
electrical hazards. Only replace a damaged cable with one of
the same type and specifications.
 Have a trained technician perform the installation in wet rooms.
 Do not operate the appliance if it is visibly damaged.
 This appliance may only be repaired by qualified personnel.
Inadequate repairs can cause considerable hazards.
If you device should need repairing, please contact customer
service.
24
CoolMatic MR07, MRR07, MH07
EN