Route The Cables - Axis Q8685-LE Guide D'utilisation

NO NO TICE NO TICE TICE
Do not use sharp tools when you remove the transparent base unit cover.
4. Remove the transparent base unit cover.
1
Conduit cover clip
2
Conduit cover
3
Screw hole (x4)
5. For conduit installations only: remove the two conduit cover clips followed by the
conduit cover.
6. Attach the base unit to the mounting surface with appropriate fasteners in the four
screw holes.

Route the cables

WARNING
Risk of electric shock. The product shall be grounded using both the protective grounding
wire in the power cable and the grounding braid. Make sure both ends of the protective
grounding wire and the grounding braid are in contact with their respective grounding
surfaces.
Important
Use only cables that comply with the specified cable area. For more information, see
Cable thickness on page 53.
AXIS Q8685-LE PTZ Network Camera
23
EN